TOP QUALITY
HUGE INVENTORY
PREMIUM MATERIALS
FAQs
It’s designed as a true direct-fit replacement for your original equipment (OE) cat - no cutting, welding, or fabrication required. Just unbolt your old, damaged unit and bolt this one right into the factory mounting points.
It’s normal if the replacement has a slightly different shape or body design than the bulky factory unit. It's engineered specifically for your exact application's exhaust flow and chassis clearance, so always do a test fit before assuming it's the wrong part. Once it's lifted into place, it should bolt up perfectly despite any cosmetic differences.
Liquid or RTV sealers should not be used on your catalytic converter or your oxygen sensor ports. The off-gassing from silicone sealers can contaminate the sensors and ruin the precious metals inside the cat. Always use fresh, dry gaskets (often included with your new cat) to get a proper seal.
A dead catalytic converter is almost always a symptom, not the root disease. If you don't fix the underlying engine management issue that killed the factory one - like a misfire dumping raw fuel, a heavy oil leak, or a bad tune - you'll just melt this brand-new unit, too. Check your O2 sensors, fix any fuel trim issues, and decarbonize your upper engine before installing your new converter.
We offer a huge selection of units built to meet rigorous Federal EPA standards, as well as many that are CARB compliant - be sure you're aware of the needs of your vehicle and the laws in your state or region and order accordingly. Assuming the rest of your motor is healthy and running right, bolting one of these in will clean up your exhaust and get you that passing grade on your next emissions test.